1.安裝防水材料：在安裝衛生間隔斷之前，可以考慮在墻面和地面上安裝防水材料，如防水涂料、防水膜等。這樣可以阻止水分滲入到隔斷材料中，減少水漬的產生。

1. Installing waterproof materials: Before installing bathroom partitions, it is possible to consider installing waterproof materials on walls and floors, such as waterproof coatings, waterproof membranes, etc. This can prevent water from seeping into the partition material and reduce the generation of water stains.

2. 使用防水隔斷材料：選擇具有良好防水性能的隔斷材料，如防水板材、塑料隔斷等。這些材料可以防止水分滲入，并且易于清潔和維護。

2. Use waterproof partition materials: Select partition materials with good waterproof performance, such as waterproof boards, plastic partitions, etc. These materials can prevent moisture infiltration and are easy to clean and maintain.

3. 注意密封處理：在隔斷的安裝過程中，注意對隔斷板與墻面、地面之間的縫隙進行密封處理。使用防水膠或密封膠填補縫隙，防止水分滲入。

3. Pay attention to sealing treatment: During the installation process of the partition, pay attention to sealing the gaps between the partition board, the wall, and the ground. Use waterproof glue or sealant to fill the gaps and prevent water from seeping in.

4. 及時清潔和干燥：定期清潔衛生間隔斷表面的水漬，并及時擦干水分。避免水漬長時間停留在隔斷表面，以免形成污漬和水垢。

4. Timely cleaning and drying: Regularly clean the water stains on the surface of bathroom partitions and wipe them dry in a timely manner. Avoid water stains staying on the partition surface for a long time to prevent the formation of stains and scale.

5. 避免大量溢水：在使用衛生間時，避免大量的水濺到隔斷表面。適當調整水龍頭的水流，使用淋浴時使用防濺水設備等，減少水漬的產生。

5. Avoid excessive water overflow: When using the bathroom, avoid splashing a large amount of water onto the partition surface. Adjust the water flow of the faucet appropriately, use splash proof equipment when showering, etc., to reduce the generation of water stains.

衛生間隔斷廠家

Toilet partition manufacturer

6. 定期維護：定期檢查衛生間隔斷是否有損壞或老化的情況。如發現有問題，及時調整或更換受損部分，以保持隔斷的完整性和防水性能。

6. Regular maintenance: Regularly inspect the bathroom partitions for any damage or aging. If any problems are found, adjust or replace the damaged parts in a timely manner to maintain the integrity and waterproof performance of the partition.